Make Your Ford F150 Look Like New With Front End Rebuild Kits Ford F150

Looking to rebuild the front end on your Ford F150? There are a few different options when it comes to front-end rebuild kits, and it can be tough to decide which one is best for your needs. In this blog post, we’ll take a look at some different front end rebuild kits Ford F150 and compare them to help you make the best decision for your truck.

These kits are available for a variety of different models and can include everything from new headlights and bumpers to fenders and grilles. They’re a great way to give your truck a fresh new look without spending a lot of money. The kit includes all of the parts and tools that you need to get the job done, and it’s a great way to save money on repairs. Now, let’s get started.

Bestseller No. 1
Detroit Axle - 4x4 Front Upper Control Arm w/Ball Joints Tie Rods Replacement for Ford F-150 F-250 Expedition - 8pc Set
  • Front End Kits Compatible With 4WD Models Only
  • This Kit Includes: 2 Pcs upper control arm with ball joint, 2 Pcs Lower Ball Joint, 2 Pcs Front Outer Tie Rod End And 2 Pcs Inner Tie Rod End
Bestseller No. 2
AUTOSAVER88 -Front Control Arm Kit Compatible with 1997-2003 Ford Expedition/F-150/F-250, 1998-2002 Lincoln Navigator -14pcs Front Suspension Kit(4WD Only)
  • Vehicle fitment: : 4WD models ONLY. Please confirm your vehicle details by VIN, and check your vehicle in the fitment filter system
  • Package content: 2x Front upper control arm w/bushing and ball joint, 2x Front lower ball joints, 2x Front outer steering tie rod end, 2x Front inner steering tie rod end, 1x Front steering idler arm(2.5" bolt pattern), 2x Front tie rod end adjusting sleeve, 2x Front sway bar end link kit and 1x Front steering pitman arm
SaleBestseller No. 3
USA Standard Gear (ZK F8.8) Ford 8.8" Diff Master Overhaul Kit
  • USA Standard Master Overhaul kits let you finish your install with confidence
  • This kit uses Koyo bearings and races
Bestseller No. 4
Detroit Axle - 4WD Front Upper Control Arms Tie Rods Suspension Kit Replacement for Ford Expedition F-150 F-250 Lincoln Navigator - 14pc Set
  • For 4WD/4x4 Models Only; Will Not Fit Vehicles Over 8500 Gross Vehicle Weight
  • Replacement for 1997-2002 Ford Expedition - [1997-2003 Ford F-150] - 1997-1999 Ford F-250 - [1998-2002 Lincoln Navigator]
Bestseller No. 5
Detroit Axle - 2WD Front Upper Control Arms w/Ball Joints + Sway Bars + Tie Rods + Pitman Idler Arms Replacement for Ford Expedition F-150 F-250 Lincoln Navigator - 12pc Set
  • 2-Wheel Drive Models Only (2WD)**There are two different versions of idler arm for these vehicles. This kit provides an idler arm with a 2.5" bolt pattern. Please consult with your mechanic to verify which specific bolt pattern you have BEFORE purchasing!
  • Fits: Specific Models - Check Fitment Chart and Product Description for Accurate Information
Bestseller No. 6
SCITOO 10pcs 4WD Front Suspension Kit Inner Tie Rod End Outer Tie Rod End Adjusting Sleeve Lower Ball Joint Upper Ball Joint Fit 1987-1996 For Ford For F-150 Bronco
  • 【Suspension Kit Fitment】 - 1987-1996 For Ford Bronco 4WD, 1987-1996 for Ford for F-150 4WD
  • 【Suspension Kit Include】- 1x DS1017T Front Inner Tie Rod End - Driver Side, 2x K8195T Front Lower Ball Joint, 1x ES2078LT Front Outer Tie Rod End - Driver Side, 1x ES2077RT Front Outer Tie Rod End - Passenger Side, 1x ES2080S Front Tie Rod Adjusting Sleeve, 2x K80026 Front Upper Ball Joint, 1x DS1138T Inner Tie Rod End - Passenger Side, 1x ES2079S Tie Rod Adjusting Sleeve - Passenger Side
Bestseller No. 7
Detroit Axle - 4WD Front Upper Control Arms + Lower Ball Joints + Tie Rods + Sway Bars Kit Replacement for Ford F-150 Expedition Lincoln Navigator - 13pc Set
  • Fits 4WD Models Only
  • Replacement for 1997-2002 F-150 - [1997-2003 F-250 Under 8500lb GVW; Light Duty] - 1997-1999 Expedition - [1998-2002 Navigator]
Bestseller No. 8
OCPTY - New 10-Piece RWD 2WD Front Suspension Kit Fit 1987-1996 for Ford for F-150 Upper Lower Ball Joint Inner Outer Tie Rod End Adjusting Sleeve Center Link
  • [SUSPENSION KIT FITMENT] 1987 1988 1989 1990 1991 1992 1993 1994 1995 1996 For Ford For F-150 2WD Extended Cab Pickup;1987 1988 1989 1990 1991 1992 1993 1994 1995 1996 For Ford For F-150 2WD Standard Cab Pickup;
  • [SUSPENSION SYSTEM FUNCTION] Suspension system transmits the force and force twist acting between the wheel and the frame, buffering the impact force transmitted from the uneven road surface to the frame or the body, and attenuating the vibration caused thereby.
Bestseller No. 10
Detroit Axle - 4WD Front Upper Control Arms w/Lower Ball Joints Sway Bars Tie Rod Ends w/Boots Replacement for 2004-2005 Ford F-150
  • Replacement for - 2004-2005 Ford F-150 (Fits 4WD Models; w/ 90 Degree Angle Sway Bars; Built Before 11/29/2004; New Body)
  • Kit Includes: (2) Upper Control Arms w/Ball Joint, (2) Front Lower Ball Joints, (2) Front Sway Bars, (2) Inner Tie Rods, (2) Outer Tie Rods and (2) Rack & Pinion Tie Rod Boots & Bellows w/ Locking C-Clamps
SaleBestseller No. 11
Detroit Axle - Front Strut, Upper Control Arm Replacement for Lincoln Mark LT, Ford F-150, Coil Spring Assembly, Ball Joint, Tierod, Sway Bar - 14pc Kit
  • Both (2) Front Upper Suspension Control Arm & Ball Joints
  • Both 2 Front Coil Spring Quick Install Assemblies
Bestseller No. 12
Detroit Axle - Front Upper Control Arms Lower Ball Joints Sway Bar Links & Outer Tie Rod Ends Kit Replacement for 2004-2005 Ford F-150 2WD New Body Style w/90 Degree Sway Bar Links - 8pc
  • Replacement for 2004-2005 Ford F-150 New Body Style 2WD Models w/Bent(90 Degree Angle) Sway Bar Link
  • Kit Includes: (2) Front Upper Control Arms + (2) Lower Ball Joints + (2) Sway Bar End Links + (2) Outer Tie Rods
Bestseller No. 13
SCITOO 10pcs 2WD Front Suspension Kit Upper Control Arm Inner Outer Tie Rod End Sway Bar Link Lower Ball Joint Fit 2005-2008 For Ford For F-150 2006-2008 For Lincoln Mark LT
  • 【Suspension Kit Fit】 2005 2006 2007 2008 For F-150 2WD;2006 2007 2008 For Lincoln Mark LT 2WD;
  • 【Suspension Kit Include】(1) K80306 Front Upper Control Arm And Ball Joint - Driver Side;(1) K80308 Front Upper Control Arm And Ball Joint - Passenger Side;(2) ES3691 Front Outer Tie Rod End;(2) EV463 Front Inner Tie Rod End;(2) K80149 Front Lower Ball Joint;(2) K80337 Front Sway Bar End Link;
Bestseller No. 14
10 Pcs Front Suspension Kit Inner & Outer Tie Rod Ends Lower Ball Joints Upper Control Arms & Ball Joints Sway Bar End Links
  • Compatible with Ford F-150 2005 4WD (From 11/29/04), F-150 2006-2007 4WD, F-150 2008 4WD/AWD / Lincoln Mark LT 2006-2008 4WD/AWD
  • OEM Design Direct Fit / Eliminates rattling and clunking noises associated with a failed tie rod / Precision-made performance and additional strength
Bestseller No. 15
Detroit Axle - 4WD Front Upper Control Arms + Tie Rods + Sway Bars Replacement for 2009-2014 Ford F-150 [Exc. Raptor] - 12pc Set
  • Replacement for 2009 - 2014 Ford F-150 (4WD; Non-Raptor Only)
  • Kit includes: 2x Front Upper Control Arms; 2x Sway Bar Links; 2x Outer Tie Rods; 2x Inner Tie Rods; 2x Lower Ball Joints; 2x Boots & Bellow
Bestseller No. 16
Detroit Axle - Front Tie Rod End Kit W/Boots + Sway Bar Link + Lower Ball Joints Replacement for 2009-2014 Ford F-150 [4WD Excludes Raptor] - 10pc Set
  • Inner And Outer Tie Rods Sway Bar End Links Boots Parts For 4wd Only Except Raptor Models, A Replacement For 2009 Ford F-150 Inner Outer Tie Rods Stabilizer Links Boots 2010 Ford F-150 Stabilizer Bar Tie Rod End Suspension Rod Tie Rod Tool Tie Set 2011 F-150
  • Kit Includes: (4) Front Tie Rods + (2) Front Lower Ball Joints + (2) Front Sway Bar+ (2) Boots Front End Kit Will Return Your Vehicle Back To Original Ride Quality
Bestseller No. 17
2WD Only Front Upper Control Arms kits fits 1997-2002 for Ford Expedition F-150 F-250; 1998 1999 2000 2001 2002 for Lincoln Navigator Upper Control Arms kits - 14pc Set
  • Compatible with: **FITS 2WD / RWD MODELS ONLY** Replacement for 1997-2002 Ford Expedition (All 2WD Models) Replacement for 1997-2003 Ford F-150 (All 2WD Models) Replacement for 1998-1999 Ford F-250 (All 2WD Models) Replacement for 1997 Ford F-250 (All 2WD Models w/ 5.4L OR 4.6L Engines) Replacement for 1998-2002 Lincoln Navigator (All 2WD/RWD Models) Replacement for 2002 Lincoln Blackwood (All 2WD/RWD Models)
  • Interchange Part Number: K8726; K8728; K8695; K8772; K8700; K8739; ES3364; ES3365; ES3366; ES3367; ES3368
Bestseller No. 18
Detroit Axle - 10PC Front Upper Control Arms w/Ball Joints, Sway Bars, Inner and Outer Tie Rods for 2007 2008 2009 2010-2015 Ford Expedition/Lincoln navigator - [09-14 F-150 2WD]
  • For - 2007-2015 Ford Expedition - [2007-2015 Lincoln Navigator] - 2009-2014 Ford F-150 (2WD; Excluding Raptor Models)
  • Kit Includes: (2) Front Upper Control Arms, (2) Lower Ball Joints, (2) Front Sway Bars, (2) Inner Tie Rods and (2) Outer Tie Rods
Bestseller No. 19
AUTOSAVER88 Front Control Arm Kit Compatible with 2009-2014 Ford F-150 4WD AWD -w/Ball Joints, Steering Tie Rod End, Sway Bar End Link
  • Vehicle fitment: : Please confirm your vehicle details by VIN, and check your vehicle in the fitment filter system
  • Package content: 2x Front upper control arm w/ball joint, 2x Front lower ball joint, 2x Front sway bar end link, 2x Front outer steering tie rod end, 2x Front inner steering tie rod end
Bestseller No. 20
Detroit Axle - 4WD Front Ball Joints Tie Rod Suspension Kit Replacement for 2005-2016 F-250 F-350 Super Duty - [Excludes Extended Axle Models]
  • Replacement for 2005-2016 Ford F-250 F-350 Super Duty 4WD (Excludes Extended Axle)
  • Kit Includes: (4) Upper and Lower Ball Joints + (1) Drag Link at Pitman Arm + (1) Adjustment Sleeve + (2) Outer Tie Rod + (1) Front Right Outer Steering Tie Rod at Pitman Arm

Front End Rebuild Kits Ford F150 Reviews 2023

Andersen Restorations Front End Suspension Rebuild Kit with Ford Torino OEM Spec Replacements

The Andersen Restorations Front End Suspension Rebuild Kit is a complete kit that includes everything needed to rebuild or replace the front end suspension on a 1968 Ford Torino. It has a ton of parts that are guaranteed to fit like a glove and look like the original. This is a great kit and has a lot of components that are used in suspension systems. From the information given, the Kit is good for the replacement of parts, not a whole system. It is not complete.

This suspension rebuild kit comes with replacement parts that many people will be able to use right away. It has a huge variety of parts which allows customers to put it together in a way that they are happy with. It is designed to work with all years of Torino, this kit will help restore proper handling and steering as well as improve highway comfort. This kit will take you from your original steering linkage parts to a Ford Torino OEM specification parts kit.

This suspension rebuild kit for the Ford Torino is well-built and delivers excellent quality at a budget-friendly price. It is compatible with the Ford Torino models with O.E.M. ball joint parts in place. This kit includes all necessary components for this project and lasts a lifetime. In another way, this kit comes with a full set of the highest quality OEM replacement parts and does not require any modifications to the vehicle.

Pros:

+ Full set with a variety of parts

+ High-quality replacements

+ Budget-friendly

+ Compatible with the Ford Torino models

Cons:

– Nothing

Detroit Axle – Front Upper Control Arms

Detroit Axle - Front Upper Control Arms w/Ball Joints Tie Rods Sway Bar Links & Wheel Hub Bearings Replacement for 2000-2003 Ford F-150 4WD 5 Stud w/ABS - 16pc Set
  • Replacement for 2000 - 2003 Ford F-150 (5 Stud, M14 Studs, 4WD/4X4, 4-Wheel ABS; 2.48" Bolt Pattern)
  • Kit Included: (2) Front Upper Control Arms + (2) Lower Ball Joints + (2) Sway Bar End Links + (2) Inner Tie Rod Ends + (2) Outer Tie Rod Ends + (1) Idler Arm + (1) Pitman Arm + (2) Adjusting Sleeve + (2) Wheel Hub and Bearing Assembly

This Detroit Axle – Front Upper Control Arms are necessary for trucks with front camber plates or T-bars. They will reduce the camber of the front upper control arms by adding a negative camber in the front axle. These control arms were of high quality and functioned very well. The installation was a breeze and they work just as they should. These arm assemblies are a direct replacement for 2000 – 2003 Ford F-150 trucks.

They mount on all four corners of the truck and add much-needed strength and durability to the front end. This kit will help correct any rubbing issues you may be having with your front axle by increasing the clearance around the vehicle by working with the adjustment sleeve and joints above to ensure proper fit and function.

All the high-quality replacements control arms are designed to be able to be installed onto any F-150 equipped with a 5 stud axle. This suspension kit from Detroit Axle lowers the vehicle’s center of gravity and improves overall handling, cornering, and ride quality.

The rear axle is manufactured from high-strength steel for increased strength and durability. Detroit Axle suspension parts will provide high-quality, dependable, and dependable parts to meet the demands of today’s foreign and domestic vehicles.

Pros:

+ Reduce the camber

+ Premium replacements

+ High durability

+ Adjustable sleeve

Cons:

– No weaknesses to show

SCITOO 10Pcs Front Suspension Kit

SCITOO 10pcs 4WD Front Suspension Kit Upper Control Arm Inner Tie Rod End Outer Tie Rod End Sway Bar End Link Lower Ball Joint Fit 2005 2006 2007 2008 for Ford for F-150
  • 【Suspension Kit Fit】 2005-2008 For Ford F-150(4WD);2006-2008 For Lincoln Mark LT(4WD);
  • 【Suspension Kit Include】(1) K80306 Front Upper Control Arm And Ball Joint - Driver Side;(1) K80308 Front Upper Control Arm And Ball Joint - Passenger Side;(2) ES3691 Front Outer Tie Rod End;(2) EV463 Front Inner Tie Rod End;(2) K80149 Front Lower Ball Joint;(2) K80338 Front Sway Bar End Link;

The SCITOO Front Suspension Kit is an excellent and affordable way to upgrade and restore your vehicle’s handling to the original factory specifications. The kit is designed to allow for a greater range of motion, higher safety, and increased performance. It is easy to see why this kit is so popular. The low price of this kit combined with the fact that it comes pre-assembled with good quality parts makes this a great value for money.

It has four-wheel power distribution, controlled ride, and responsive steering.  It is not just a suspension kit but also available with an extra sway bar and CV boot. This kit will not only solve your steering noise but also add additional security by aligning the geometry of your car.

This kit includes all the components needed to help prevent damage to the front end of your vehicle when making sharp turns. They are the springs, boots, and brake parts. It installs in minutes and relieves most of the steering strain you’ve had over the years. It also gives your tires more air which allows them to float properly. This makes it one of the best kits to buy if you need to replace the broken parts of your car’s suspension system.

It will help you restore and maintain the quality of your vehicle by replacing worn or defective parts and allowing your vehicle to operate smoother and perform better. This kit will surely improve your performance and make the process of installing adjustable shocks that much easier.

Pros:

+ Good quality parts

+ Include all essential components

+ Prevent damage

+ Easy to install

+ Pre-greased end parts

Cons:

– Everything is ok

Detroit Axle – 4WD Front Upper Control Arms + … Kit Replacement

Detroit Axle - 4WD Front Upper Control Arms + Lower Ball Joints + Tie Rods + Sway Bars Kit Replacement for Ford F-150 Expedition Lincoln Navigator - 13pc Set
  • Fits 4WD Models Only
  • Replacement for 1997-2002 F-150 - [1997-2003 F-250 Under 8500lb GVW; Light Duty] - 1997-1999 Expedition - [1998-2002 Navigator]

The Detroit Axle kits are one of the best performance parts kits on the market. These Axle Arm kits are included with Jeep Grand Cherokee, Chrysler Grand Voyager, and Jeep Cherokee from 1997-2002, and Will fit all 1991-1993 Dodge & Plymouth and 1994-1997 Dodge & Plymouth under 8500 GVW. This kit will also fit Dodge Dakota 1997-2001.

They are made from heavy-duty low nudge casting to make them last as long as possible. The fronts are forged by Detroit and are the toughest, biggest, best-looking performance parts on the market. This kit is designed to improve handling and increase safety on any four-wheel vehicle.

The durable design also improves the ride and handling. It will give you the ability to lift the front of your truck by adding the above items. These components are CNC manufactured in the USA and are 100% OE style replacements. This is the quickest and easiest way to increase the handling, steering control, and stability of your 4×4 vehicle.

With a 4×4 system installation, your vehicle will perform better on city streets, trails, and open highways. A front axle control arm kit provides your vehicle with a smooth and comfortable ride by reducing brake dive and providing an easy-to-use steering feel.

Pros:

+ Heavy-duty material

+ Increase safety

+ Durable design

+ 100% OE replacements

+ Easy-to-use steering feel

Cons:

– Trouble to distinguish the inner/outer tie rod

AUTOSAVER88 – Front Control Arm Kit

AUTOSAVER88 -Front Control Arm Kit Compatible with 1997-2003 Ford Expedition/F-150/F-250, 1998-2002 Lincoln Navigator -14pcs Front Suspension Kit(4WD Only)
  • Vehicle fitment: : 4WD models ONLY. Please confirm your vehicle details by VIN, and check your vehicle in the fitment filter system
  • Package content: 2x Front upper control arm w/bushing and ball joint, 2x Front lower ball joints, 2x Front outer steering tie rod end, 2x Front inner steering tie rod end, 1x Front steering idler arm(2.5" bolt pattern), 2x Front tie rod end adjusting sleeve, 2x Front sway bar end link kit and 1x Front steering pitman arm

This is an excellent product for any consumer who needs to replace control arms in their truck. This kit comes with everything you need to replace the front control arms and maintain the same height and handling you had previously. These parts provide the same performance and durability as other companies’ similar models without being nearly as expensive.

The cheaper parts are prone to breaking, but these parts are built to last. The front control arm kits provided on this page contain all of the components needed to repair your 4WD front axle by replacing your upper and lower control arms, outer and inner tie rods, ball joints, sway bar end links, tie rod ends, and pitman’s arm.

This front control arm kit is ideal for 4WD vehicles, but may also be used on 2WD vehicles with 2.5″ bore steering shafts. This product will help address ball joint end play issues. The ball joints are built with rust-proof material and the suspension components are painted with a protective coating that repels rust.

These control arms come in a set of two, allowing you to replace both front control arms at the same time. The ball joints are pre-greased, and the suspension kits are greased at the factory to ensure a smooth and seamless installation. These new Arm Roll kits were developed to replace the standard arm rollers that were used in the past. A durable rubber sleeve was used for the arm rollers which performs better than the older rubber rollers.

Pros:

+ Built to last

+ Rustproof

+ Pre-greased ball joints

+ Smooth installation

+ Rubber sleeve

Cons:

– The lower ball joints don’t have much of a lip

Motorman 6pcs Front Upper&Lower Control Arm with Ball Joint

Motorman 6pcs (1) K620177+(1) K620178+(1) K010536+(1) K010535+(2) K010534 Front Upper&Lower Control Arm with Ball Joint for 2011-2017 300,CHALLENGER,CHARGER
  • Package:1pc Front Left Driver Side Upper Control Arm w/Ball Joint Assembly - K620177,1pc Front Right Passenger Side Upper Control Arm w/Ball Joint Assembly - K620178,1pc Front Left Driver Side Lower Forward Control Arm w/Ball Joint Assembly - K010536,1pc Front Right Passenger Side Lower Forward Control Arm w/Ball Joint Assembly - K010535,2pcs Front Lower Rearward Control Arm - K010534
  • Compatibility - 2011 - 2017 CHRYS LER 300 RWD,2018 - 2019 CHRYS LER 300 RWD ; V8 5.7L w/o High Performance Suspension; V6 3.6L,2011 - 2014 DOD GE CHALLENGER  RWD,2015- 2017 DOD GE CHALLENGER RWD V6 3.6L,2018 - 2019 DOD GE CHALLENGER RWD; V8 5.7L w/o High Performance Suspension; V6 3.6L,2011 - 2017 DOD GE CHARGER RWD,2018 - 2019 DOD GE CHARGER RWD; V8 5.7L w/o High Performance Suspension; V6 3.6L

These Motorman front control arms provide a high-performance upgrade for the Mustang GT, V6, or V8. With the ball joints included, this is the ideal upgrade for racing. These control arms are designed for drivers who are looking for a simple, affordable way to make subtle power steering adjustments to their vehicles. They offer an all-new ball joint design, which offers greater bearing support, while still maintaining the same geometry as the original.

These control arms fit the requirements of our aftermarket DURATEC Suspension Systems for Dodge, Chrysler, and RAM. These control arms provide a better, more comfortable ride for the driver, passenger, and all occupants of the vehicle. These top-quality upper and lower control arms allow you to adjust your vehicle’s alignment and drivetrain to improve handling and performance

 Using the proper upper and lower control arms gives your vehicle optimum handling while enhancing your vehicle’s safety performance. These control arms are excellent additions to the front end of your car. They come with new ball joints that make your car more responsive, the arm has new ball bearings to reduce wear and tear on the arm, and the ball joints are pre-installed into the arm for easy installation.

Pros:

+ Compatible with different car models

+ Give a more comfortable ride

+ Pre-installed ball joints

+ New ball bearings

+ Reduce tear and wear

+ Simple installation

Cons:

– May none

Detroit Axle – New 10pc Complete Front Upper Control Arm Suspension Kit

Detroit Axle - New 10pc Complete Front Upper Control Arm Suspension Kit Replacement for Expedition F150 F250 Light Duty Naviagtor (2WD ONLY - 2.48' Pitman Arm Bolt)
  • Replacement for 2WD Models Only
  • Replacement for 1997-2002 Ford Expedition - [1997-2003 Ford F-150] - 1998-1999 Ford F-250 - [1997 Ford F-250 (All 2WD Models w/ 5.4L OR 4.6L Engines)] - 1998-2002 Lincoln Navigator

This complete front upper and lower control arm suspension kit is the most affordable, complete kit on the market today. The kit comes with two upper control arms and two lower ball joints, as well as four front tie rod ends. Control arms and stabilizer bar provide added weight distribution over the front of the vehicle.

Aftermarket brands can be found that provide a cheaper alternative to the OEM parts which provide a lower cost to the consumer. This kit by Detroit will help you keep your front end steady, and gives you more stability in the turns. It is designed to correct a few issues with your Ford Expedition. The kit is made to work with all generation 2wd models. It will ensure that your car handles like new during the driving season.

These are high-quality replacements guaranteed to fit the vehicle and work properly. The Tacoma arm supports the front axle assembly with independent control arms designed for increased articulation and suspension stiffness without compromising ride quality and tire life. Each arm is precision-built with solid machined billet forged steel tubing for superior strength and durability.

Pros:

+ High-quality replacements

+ Independent arms design

+ Solid machined billet steel

+ Superior durability

+ Drive more stably

Cons:

– Some inner tie rods came with no set fitting or a hole

Yukon Gear & Axle (YK F8.8-A) Master Overhaul Kit

Sale
Yukon Gear & Axle (YK F8.8-A) Master Overhaul Kit for Ford 8.8 Differential
  • Yukon Master Overhaul kits give you all the high quality parts you need to start and finish every differential job
  • Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs

Yukon Gear & Axle offers a full line of differentials that are built to function in any situation and fit any type of vehicle. This complete kit is designed to be installed on passenger-side, rear-wheel-drive vehicles. This kit provides you with all the high-quality parts and tools you need to completely overhaul your differential.

It gives you full control over the process of re-installing your differential to get the results you want. It comes with a side-length adapter and a special wrench that fits under the rocker box to make installing and removing your differential easy.

This kit is designed to repair the Timken bearings in the Yukon Gear and Axle. The Timken bearings have an exclusive thick inner race design that is more durable and better suited for harsh climates. The quality and longevity of this product will benefit you as you drive down the road for years to come.

Pros:

+ Fit many types of vehicle

+ Premium parts

+ Side-length adapter

+ Corrosion-resistant

+ Self-lubricating

Cons:

– Might not come with an acid brush and marking compound

The MILLION PARTS Front Control Arm Ball Joints Sway Bar Outer Inner Tie Rod End Link Lower Upper Suspension Kits are a nice addition to any auto or truck. These kits help solve a variety of different problems and protect your vehicle. The front control arm ball joints from Million Parts are excellent replacement parts for Mercedes, Volvo, and Audi vehicles.

This product has a steel spindle, ball bearing, and upper and lower ball joint. The upper ball joint is designed for a standard attachment. They are also quite easy to install and were a perfect replacement for the ones that were originally installed on my car. They were also very easy to install and did not require any special tools or techniques.

Pros:

+ Steel material

+ Solve any problems with the car

+ Great replacements for different types of car

+ Standard ball joints

+ Easy to install

Cons:

– Nothing to be talked about

12 Piece Complete Front Suspension Kit

12 Piece Complete Front Suspension Kit Upper Control Arms, Inner & Outer Tie Rod Ends, adjusting Sleeves, Lower Ball Joints, and Sway Bar links
  • Compatible with Ford Expedition 1997-2002 4WD / Ford F-150 1997-2003 4WD / Ford F-150 Heritage 2004 / Ford F-250 1998-1999 4WD / Lincoln Navigator 1998-2002 4WD
  • OEM Design Direct Fit / Eliminates rattling and clunking noises associated with a failed tie rod / Precision-made performance and additional strength

This complete front suspension kit for your 1997-2002 Ford Expedition 4WD is a great choice for anyone looking to improve the ride quality of their vehicle while keeping their gas mileage under the recommended minimums. This kit is designed to help reduce excessive movement in your ride while improving overall performance.

The leaf springs would often break and cause problems which required a new vehicle for most of the owners. This kit includes all of the components needed to convert your front end to an independent suspension. This spacer kit is perfect for those who have an 18″ suspension lift on their Ford or Lincoln. It is compatible with all vehicles that have independent front suspensions and is designed to work with the factory power steering gear.

These kits are designed to fit models with leaf spring and shock requirements that are similar to that of an OEM front suspension. This kit will greatly improve the front suspension alignment of your vehicle. It is extremely easy to install and should resolve most rattling and clunking noises associated with a failed front suspension.

Pros:

+ Reduce excessive movement

+ Contain all components

+ Compatible with all vehicles

+ Easy usage

Cons:

– No have a pitman’s arm

Mid Valley – 10pcs Suspension & Steering Kit

Mid Valley - 10pcs Suspension & Steering Kit Tie Rod Ends Ball Joints Center Link Drag Bar Adjusting Sleeves for Ford Bronco F-150 1980-1996 DS1017 DS1018 ES2077 ES2079 ES2080
  • Fits Ford Bronco 4WD 1980 1981 1982 1983 1984 1985 1986 1987 1988 1989 1990 1991 1992 1993 1994 1995 1996, Fits F150 4WD 1980 1981 1982 1983 1984 1985 1986 1987 1988 1989 1990 1991 1992 1993 1994 1995 1996
  • Package Include : 1 DS1017 Inner Tie Rod 1 DS1018 Center Link 1 ES2077 Outer Tie Rod End 1 ES2078 Outer Tie Rod End 1 ES2079 Adjusting Sleeve 1 ES2080 Adjusting Sleeve 2 K8388 Upper Ball Joints 2 K8195 Lower Ball Joints

This Mid Valley kit is perfect for anyone looking for a sturdy suspension system to go along with their vintage Ford Bronco or F150. This kit was designed to give you the power and control to drive over any terrain while working in the dirt. The kit also comes with new steering bearings and a set of shocks to help keep the ride smooth.

This suspension kit is perfect for replacing your worn-out steering rack and bushings. It also comes with sway bar bushings, ties rod ends, upper control arm, and vehicle-specific mounting hardware. It also contains a pair of leaf springs and complete mounting hardware. 

These steering components are designed to prevent the steering wheel from twisting under extreme cornering, thereby increasing the car’s performance. They can be installed easily by adjusting the inner and outer tie rods. It is commonly used to lower a vehicle’s center of gravity, improve handling, and increase drivability.

Pros:

+ New steering bearings

+ Keep ride smooth

+ Consist of leaf springs

+ Increase stability and durability

Cons:

– None

Detroit Axle – 6PC Front Upper Control Arms w/Ball Joints and Sway Bars Replacement

Detroit Axle - 6PC Front Upper Control Arms w/Ball Joints and Sway Bars Replacement for 2004 2005 Ford F-150 4x4
  • Replacement for 2004-2005 Ford F-150 (Fits 4x4 (4-Wheel Drive); w/ 90 Degree Angle Sway Bars; Manufactured BEFORE 11/04)
  • Kit Includes: (2) Upper Control Arms w/ Ball Joints, (2) Lower Ball Joints and (2) Front Sway Bar Links

This Detroit Axle suspension kit is perfect for Ford truck owners who need to replace the broken and worn suspension on their vehicle. These new control arms are designed with a custom shaft torsion bar to extend the life of the original ball joints.

The new front upper control arms with the ball joints and sway bars give the truck more rigidness and steering response. The old control arms had cheap ball joints that wore down and caused the car to wobble. It would be perfect for those living in areas where vehicle maintenance is difficult or expensive, or if space is limited.

The forward and backward movement of the ball joints greatly enhances the vehicle’s stability. These control arms are the last ones you will ever need to replace. They are high quality and extremely well made. The ball joints are center-set so they have a straight axle through them so your truck rides smoothly.

Pros:

+ High-quality

+ Help you drive smoothly

+ Center-set ball joints

+ New control arms

Cons:

– Quite good without weaknesses

MUCO 4Pcs Suspension kit Control Arm Assembly Front Upper Drivers&Passengers

MUCO 4Pcs Suspension kit Control Arm Assembly Front Upper Drivers&Passengers W/Lower Ball Joint fit F-150 Expedition
  • Fitment: Expedition 2007-2014;F150 2004-2014;Lincoln Navigator 2007-2014.Your Also Can Use Amazon Finder Part Check This Contronl Arm Assembly Will Work On Your Vehicle.
  • OEM Replacement Number:1pc Drivers Side Upper Control Arm with bushings CK80306,K80306,RK80306,CMK80306,CMS40114,MK80306, MS40114,TXK80306, 1 X TVA-RK80306, TXMS40114,DM35.480306,9L3Z3085A,8T4Z3079A,520-285; 2Pcs Front Sway Bar Stabilizer Links K80338,MK80338,DM35.480338; 2PCS Lower Ball Joints K80149,MK80149,TXK80149,DM35.480149,2L1Z3050A.Please Reference Your Orignal Control Arm Ball Joint Assembly Number.

The MUCO suspension kits are an easy way to enhance the performance and handling of your vehicle. These suspension kits allow you to completely customize your vehicle’s handling, and they require no tools or additional parts to install.

The previous arm, which was made by Kosei, was very light, meaning it “noisily” rattled while driving. This suspension arm, by MUCO, has a weight that is close to that of the OEM arm. This is a set of improved control arms that are designed to help improve the handling of your car. They increase the amount of the suspension travel, thereby increasing the suspension travel.

Pros:

+ No need for extra tools

+ Weight OEM arm

+ Improve the handling

+ Increase suspension

Cons:

– The lower ball joints can be too big for some

GOOACC 415 Pcs Car Retainer Clips & Fastener Remover

Sale
GOOACC 415 Pcs Car Retainer Clips & Fastener Remover - 18 Most Popular Sizes Auto Push Pin Rivets Set -Door Trim Panel Clips for GM Ford Toyota Honda Chrysler
  • WORKS FOR ALMOST ALL SITUATIONS - The kit contains 18 types of most common sizes of fastener clips, suitable for the OEM replacement in 6-10mm hole sizes,that you’ll always have the right size.
  • IMPACT RESISTANT PUSH RIVETS - Well made of durable Nylon plastic, not easy to break or crack like other brands, it is super sturdy!

This GOOACC retainer clips organizer box is an excellent way to make sure you always have the right fastener clip on hand.  This retainer clip comes in a set of 415 pieces, perfect for DIY-ers looking to keep track of any parts or accessories in their vehicle. The plastic box ensures that no parts are lost between the sets of clips, and the sturdy material ensures that the clips won’t get easily broken.

This tool allows users to take off their own vehicle’s equipment with ease, keeping back their car from becoming a “crappy mess.” There are no rusted holes, cheap plastic, etc. This product is a great way to make sure that you have easy access to things that you need during car shows or automobile restoration. The whole set works well to keep screws, bolts, or nuts where they should be.

Pros:

+ Sturdy material

+ Abrasion proof

+ Easy to set up

+ OEM design

Cons:

– Not much change when locked

GOOACC 166 Pcs Car Retainer Clips &Screw Grommets

Sale
GOOACC 166 Pcs Car Retainer Clips &Screw Grommets - 12 Most Popular Sizes & Applications for GM Toyota Honda Nissan Mazda - Bonus Fastener Remover
  • MADE OF HIGH QUALITY NYLON - Made of very durable nylon that will not break instantly like other brands.
  • MULTI-USE - Covers 5mm to 10mm hole sizes clips and screw grommets for #6 #10 #12 and #14 screw sizes for exact OEM replacement,Great for door, fender, hood & bumper for Toyota, Lexus & Mazda

GOOACC 166 Pcs Car Retainer Clips &Screw Grommets are smaller front end rebuild kits for F150 of the one above. This set of car retaining clips and screw grommets is an excellent way to solve the problem of replacing a stripped screw. It comes in 5 different sizes, so it will be able to fit all different types of screws.

It will help you to easily repair your car’s headlight damage. The set features clips that can be used to cover a 5mm to 10mm hole size and screw grommets. This is a very useful tool for doing dress repairs. All you need to do is remove your seats, upholstery, and door. Then use this tool to remove the old parts and clips and insert the new clips and screw grommets.

Pros:

+ 5 different sizes

+ Fit sizes from 5 to 10mm

+ Durable materials and design

Cons:

– Hard to remove when needing

Front End Rebuild Kits Ford F150 Benefits

front end rebuild kits ford F150

There are several reasons why front end rebuild kits for Ford F150s are a great investment. Not only do they improve the safety and performance of your vehicle, but they can also be cost-effective in the long run. Let’s see some here.

  • Replace old, worn-out parts with new
  • Consist of high-quality parts
  • Improve the performance and longevity
  • Save more money
  • Design well for being replaced
  • Improve handling and stability
  • Keep safety better

Factors To Consider When Choosing Front End Rebuild Kits Ford F150

When choosing a front end rebuild kit for your Ford F150, there are three important factors to keep in mind. They are the type of kit, the material and durability, and the compatibility. Now, we will help you know why.

front end rebuild kits ford F150

The Type Of Kit

There are different types of kits available, so it is important to select the right one. The kit should include all of the parts that are needed to complete the rebuild. It is also important to make sure that the kit is compatible with the model of the truck.

The Material And Durability

When it comes time to do a front-end rebuild on your Ford F150, it’s important to consider the material and durability of the rebuild kit you choose. Some kits are made of cheap materials that won’t hold up over time, while others are made of high-quality materials that will last for years. So, when making your decision, be sure to factor in the quality of the rebuild kit as well as the price.

The Compatibility

The compatibility when choosing the front end rebuild kits ford F150 is important to know. Some people think that all the same front-end rebuild kits for ford F150s will work for their car, but this is not the case. Different models of the Ford F150 will require different front-end rebuild kits. The best way to find the right kit for your car is to do some research on the internet or go to a car dealership.

FAQs about Front End Rebuild Kits Ford F150

front end rebuild kits ford F150

Q: What does a front-end rebuild kit for a Ford F150 include?

A: A front end rebuild kit for a Ford F150 includes all of the necessary parts to rebuild the front end of the truck, including the suspension, steering, and brakes. The kit can be purchased from a variety of retailers, and typically includes detailed instructions on how to complete the rebuild.

Q: How do I install a front-end rebuild kit for a Ford F150?

A: Installing a front end rebuild kit for a Ford F150 is a fairly simple process that can be completed in a few hours. The kit can be purchased from most auto parts stores and includes all of the necessary components and instructions.

Summary

Hopefully, having read this article, you have learned a couple of things about the differences between front end rebuild kits ford F150. Regardless of whether you are shopping to save money or because you are on a budget, these tips will help you find the best options.

And for us, the best choice is the Andersen Restorations Front End Suspension Rebuild Kit with Ford Torino OEM Spec Replacements. Because this is a full kit of high-quality replacements. It will provide the greatest experience for you with a friendly budget.

Thanks for reading.

Don’t forget to share it with others.

See you.

Leave a Comment